Verified seller 
Volvo FH 540 8x2 Kranbil m/ 2021 165 t/m HIDROKON kran m/ jibb og vins platform truck
≈ €331,900
HEIMDAL
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
16,185 kg
Norway, HEIMDAL
Norway, HEIMDAL
16,825 kg
Norway, HEIMDAL
15,605 kg
Norway, HEIMDAL
Suspension on 3rd and 4th axle: air
EU approved until: 21.02.2026
crane certified until: 6325
Technical approved
Specifications
721 Engine hours
241 Crane hours
Euro 6 engine
2 x 110 liter variable pumps
2 x manual extensions for main boom and 2 x for jib
Scanreco optical remote control (Top model)
Weight cell main boom
Additional function for main boom and jib
Auto leveling (The car puts itself in a level position ready for lifting.)
Virtual space (Possibility to limit all axes with a few keystrokes
no need to open a workshop for this. Brilliant when working under high voltage etc.)
SKF central lubrication ring and up to the first link
Extra function all the way up the jib
Single winch hook (Jib / main boom)
2 shear winch hooks (Jib / main boom)
4-point winch hook (Main boom)
Hook for jib
Hook for main boom (Large hook)
N d lower the generator (24 volts)
Cable stop sensor and sleeve
4 ton winch
Diagnostic cable for online help (Remote help)
Danfoss valve center
2 x 2 ton counterweight (M is only used for cranes above the cabin
otherwise the counterweights are not needed
and these can be removed as needed)
Front support leg
Structure
4 x work lights strategically placed inside each outrigger cabinet
50" LED bar work light at the rear of the cab
Powerful LED lights in the crane
VBG mount
with air servo control unit mounted in rear cabinet left side
Roof rack
2 high beam LED bar on roof forward (daylight!!)
Orange work warning LED beam on the roof
EasyUp foldable ladder with side railing
Boxes for chains
screws
etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving
Charger for control in cabin
Plastic inner fenders axle 3 and 4
3 edge pull-out cabinet between axles 3 and 4
On the left side between axles 2 and 3
a large cupboard with a 500 W fan heater is installed for hanging clothes to dry
etc
Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly
with rounded edges for a very professional look
CNC manufactured plates up the back of the cabin
Fully painted sides
cabin and stern
Crane rest cradle for operation without jib
5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan"
Right side large cabinet 1.2 x 1 meter
Powerful LED reversing/rear work lights
The rear of the car was rebuilt with CNC manufactured plates
and beautiful LED taillights have been installed in several stages
Hatches strategically placed for access to relevant facilities under the building
Precisely cut out panels in side coverage for access to screen
emergency functions
etc
Marker lights along the side mounted so that they flash together with the turn signals/direction indicators
Cradle for holding the jib when not in use
Hydraulic extra function dismantled main boom and jib
but can be installed if desired
Kettle in cabin
Microwave oven in cabin
Light
Ready for delivery
Description
We have a 2021 Volvo FH 540 8x2 Crane Truck w/ 2021 165 t/m HIDROKON crane w/ jib and winch and lots of equipment for sale
The car looks like new and has hardly been used. All services have been done at a reputable workshop
There are 8 hydraulic extensions on the main boom and 6 hydraulic extensions on the jib
Everything works as it should
according to the owner
BR SEE!
Ready for delivery