New FGM 35 low bed semi-trailer
Frosinone7636 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+39 347 726...
Show
+39 347 726 0640
+39 335 826...
Show
+39 335 826 6119
Italy 
26,500 kg
Italy, FROSINONE FR
48,000 kg
Net weight
38,500 kg
Italy, FROSINONE FR
27,800 kg
Net weight
12,000 kg
Italy, Frosinone
28,000 kg
Net weight
11,000 kg
Italy, Frosinone
28,000 kg
Net weight
11,000 kg
Italy, Frosinone
28,000 kg
Net weight
11,000 kg
Italy, Frosinone
24,000 kg
Net weight
12,000 kg
Italy, Frosinone
28,000 kg
Net weight
11,000 kg
Italy, Frosinone
24,000 kg
Net weight
12,000 kg
Italy, Frosinone
24,000 kg
Net weight
12,000 kg
Italy, Frosinone
54,000 kg
Italy, Milan
Italy, Milan
Italy, Santerno Ravenna (RA)
26,100 kg
Net weight
12,500 kg
Italy, FROSINONE FR
39,000 kg
Italy, Ravenna
63,000 kg
Net weight
11,000 kg
Italy, FROSINONE FR
Available for viewing by appointment in Frosinone
European Approval – 1-Year Warranty
Chassis: F21182
Main Features:
• 2 BPW axles (11 tons) with air suspension
• Hydraulic steering with TRIDEC Tritronic system
• Steering controlled by kingpin and remote control
• Electronic axle alignment during motion
• Independent hydraulic system for all functions, operable via remote control
Structure and Dimensions:
• Total length: 13,080 mm + 5,500 mm telescopic extension
• Fifth wheel height: 1,200 mm
• Lowered central area with two telescopic side beams (700 mm wide, internal clearance 1,140 mm)
• Driving ground clearance: 350 mm (clearance under beam: 80 mm)
• Gooseneck working height adjustable from –80 mm to +400 mm
Materials and Construction:
• SSAB Swedish Steel: S500/S600 up to 15 mm, S355 J2 over 20 mm
• Detachable gooseneck with hydraulic compensation (resistant section: 240 mm)
• Hydraulic cylinders for tractor frame support and load height adjustment
• Fully hot-dip galvanized frame
Capacity and Load:
• Gross weight: 38,000 kg
• Fifth wheel load: 18,000 kg
• Tare weight: 12,000 kg (±3 %)
• Certified lashing points rated at 8,000 kg
Steering and Equipment:
• TRIDEC Tritronic hydraulic steering system
• DUOMATIC pneumatic quick-release system
• FASTER multi-connection system with residual pressure relief
• Electronically controlled suspension from cab (if available)
• Axle load index Knorr Bremse TIM
Ramps and Accessories:
• Pre-equipped for electric winch above axles
• Pre-equipped for aluminum ramps (front/rear axle area)
• High-strength aluminum front ramps (18 tons per pair – 1,800 × 450 mm)
• Ramp climbing angle: 9.8° – Weight per ramp: 45 kg
• Steel front sideboard (H 600 mm), aluminum lateral sides (H 400 mm, length 1,400 mm)
• Holders for stake supports
Safety and Electrical Systems:
• EBS and ASR anti-roll braking system (Knorr Bremse)
• Multi LED II lighting system (Aspock)
• Standard 2″ interchangeable fifth wheel kingpin
Tyres:
• 8 Continental 245/70 R 17.5 tyres with steel rims
Contacts:
Phone: +39 348 933 6406 (Emanuele)
Office:show contacts
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Website: show contacts
Disponibile immediatamente presso la sede di Frosinone
Omologazione Europea – Garanzia 1 anno
Telaio: F21182
Caratteristiche tecniche principali:
• N.2 assi SAF da 12 tonnellate con sospensioni pneumatiche e freni a tamburo
• Sterzatura idraulica TRIDEC Tritronic con raggio di sterzata di 37°
• Sterzatura comandata da ralla, con radiocomando e sistema di riallineamento elettronico assali
• Impianto idraulico indipendente per tutti gli azionamenti
Capacità di carico:
• Massa complessiva a pieno carico: 42.000 kg
• Scarico su ralla: 18.000 kg
• Carico totale sui 2 assi: 24.000 kg a 60 km/h
• Tara: circa 11.800 kg (±3%)
• Portata utile: 30.200 kg
• Portate legali in Italia: 200 q.li con trattore a 2 assi – 240 q.li con trattore a 3 assi
Struttura e dimensioni:
• Lunghezza totale: 13.080 mm + 5.580 mm di estensione
• Culla utile: da 6.880 mm a 12.460 mm
• Collo sganciabile con compensazione idraulica per carico anteriore
• Altezza di lavoro del collo nella zona di sgancio: 80 mm in marcia (regolabile da -80 a +400 mm)
• Zona ribassata con 2 travi telescopiche laterali (larghezza 700 mm, luce interna 1.140 mm)
• Estensione fino a 5.580 mm con blocchi ogni 500 mm – Sezione travi: 230 mm
• Altezza di carico: 310 mm – Spazio libero da terra sotto trave: 80 mm
Impianti e dotazioni:
• Sistema frenante EBS + ASR antiribaltamento (Knorr Bremse)
• Sospensioni elettroniche
• Telaio interamente zincato a caldo con verniciatura costole laterali colore BIANCO
• 8 pneumatici Continental 245/70 R 17.5 con cerchi in acciaio
Contatti:
Telefono: show contacts (Emanuele)
Ufficio: show contacts
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Sito web: show contacts